825 E-Series the perfect addition for dismantling, sorting and loadingPublished 29/6 at 16:33
A mobile demolition machine from Sennebogen with a quick change system has impressed with its qualities of being a material handler designed and thoroughly proven to withstand continuous use in scrap yards.
Additionally it can be moved even more easily and quickly making the 825 the ideal addition to the fleet for smaller, inner city demolition projects.
Demolition machines must reliably do their job, whether tearing down, crushing, transporting and loading. Important criteria for the right machine for the job are whether the machine and hydraulic system have the necessary power for the operation, the smallest possible rear radius, and the selection of the required attachments. The latter should be as flexibly interchangeable as possible, as the intervals between demolition and sorting activities may vary from hour to hour, depending on the storage capacity on the construction site. At the same time, a comfortable and safe working environment must be created for the operators of the demolition machines. Sennebogen’s 825 Mobile E-Series fulfils all these criteria, but it can do even more. The mobile material handler has been designed for demolition projects having a powerful and economical 129kW Stage V diesel engine, and is a multifunctional all-rounder for demolition sites, especially in narrow spaces.
All tasks on the demolition site combined in one solution
Just like a Swiss army knife, Sennebogen’s mobile demolition solutions offer a wide range of possible uses, ranging from selective dismantling to the loading of demolition waste into trucks or storage containers. In the case of the 825 E-Series, this is particularly easy to achieve thanks to a fully hydraulic quick change unit at the end of the grab stick, allowing the operator to switch from bucket or shear to sorting grab use in just a few minutes. In addition, the powerful hydraulic circuit guarantees reliable and precise working, including shear applications weighing up to 2.5t at a reach height of up to 14m.
Maximum safety and efficiency
To protect both man and machine equally, there are additional features that prove their worth on the construction site. The ‘Maxcab’ for example, can be equipped with a safety package on request. This includes protective grills on the roof and front windscreen. Optional protective plates for the cylinders ensure that the piston rod remains permanently intact. The cab's 30° tilt contributes to the driver's overview of the entire working area, with two security cameras on the right and at the rear providing additional support.
Thanks to a wide range of ‘green efficiency’ technologies, the diesel powered Sennebogen machines operate with particularly low emissions, low wear and tear and save energy. Inside the machine operating costs can be reduced significantly thanks to the built-in hydraulic pump that pumps the oil through large scale valves and hoses, enabling lifting or demolition task to be carried out. The entire hydraulic circuit is thus relieved by means of a lower system pressure, which results in a proven reduction in wear on pressure sensitive components. Energy intensive auxiliary consumers, such as the fan, are also thermostatically controlled and are therefore only activated when required. ‘EcoMode’, automatic idle and automatic stop, reduce diesel consumption when handled optimally by up to 25%. The intelligent, ex works installed engine speed control systems help demolition professionals to reduce operating costs sustainably without the need for separate operator training.