Flush cutting walls and roadside kerbs with the Lissmac ‘Compactcut’ 900 P/TPublished 30/12, 2020 at 10:14
The technology used with the Compactcut 900 P/T optimises efficiency removing the problems of dealing with the extraction and cost intensive disposal of cutting slurries as the specially equipped floor saw works using the dry cutting process.
It cuts ready to cast joints and has a highly efficient dust extraction system, being designed for cutting flush with walls and kerbs.
The Compactcut900 P/T is a special design for producing joints using dry cutting being able to cut ready cast joints with a depth of up to 125mm in one step. It is ideal for renovation tasks, for producing connection and expansion joints, and on construction sites where space is at a premium, the operator can control and guide it by easily adjusting the steering knuckle.
Vertical cutting in accordance with ZTV Fug-STB 15
A‘flush cut’ blade guard allows true vertical cutting, as prescribed in the ZTV Fug standard. This is enabled by the specially shaped suction blade guard, which is a central component of the integrated ‘Vacuum-Dry’100 dry extraction system. This closed extraction system delivers dust free dry cutting, which not only saves time, but also promotes the occupational health and safety of the operator and of the entire team on the construction site. A clearly organised control panel and height adjustable handles are likewise user friendly. The robust hydrostat is activated with a sensitive response drive lever that ensures uniform, controlled machine guidance. The ergonomically positioned steering wheel enables precise correction when cutting, as well as fast change of direction and prompt transfer manoeuvres without a major expenditure of force.
The torsion resistant sheet steel frame construction is designed for many years of demanding continuous use as well as accommodating practical daily use. Through the optimally placed drive unit, Lissmac designers have ensured easy access to the air and fuel filters, battery and oil, which facilitates daily inspection and maintenance tasks. All components are arranged to ensure a centre of gravity that is as low as possible enabling a precise saw cut. The Vanguard 2-cylinder gasoline motor provides 26kW and accelerates dry cutting blades up to 400mm in diameter to 2,130rpm. This rotational speed ensures optimal sawing progress. Seven robust high performance V-belts reliably transfer the motor power to the saw blade. The electro hydraulic cutting depth adjustment is easy on the tool, with cutting depth indication to a maximum 125mm. The Compactcut900P/T is also factory equipped with a parking brake and a freewheel.