NEWS

Lindner’s latest generation of shredders

Lindner’s latest generation of shredders

Published 4/7, 2022 at 09:12

Lindner’s new ‘Urraco 4000’ model series is available with a diesel or energy efficient electric drive and ease of access to the maintenance and drive compartment. In addition to its many mobile versions, it offers universal application options, such as bulky waste, C&I, C&D, and light scrap.

Kobelco launches new SK550DLC-11 in Europe

Kobelco launches new SK550DLC-11 in Europe

Published 4/7, 2022 at 09:11

The new Kobelco SK550DLC-11 replaces the SK550DLC-10, which launched in 2018. The SK550DLC-11 features Kobelco’s Next system for high elevation and foundation demolition work and enable easy transportation between projects.

Lindner’s ‘Komet Series 3’ and ‘Fire Prevention System’

Lindner’s ‘Komet Series 3’ and ‘Fire Prevention System’

Published 4/7, 2022 at 09:10

Lindner presented the Komet Series 3, a series of shredders for secondary shredding, at Ifat 2022. This has such features as the automatic belt tensioning system (ATB), a dust protected drive unit and new software. While the new software features increase productivity, the ATB aims to ensure constant power transmission. In addition, compressed air protects the drive unit from contamination, and the adjustments to the control panel support intuitive two handed operation.

Be a waste transformer with Lindner

Be a waste transformer with Lindner

Published 4/7, 2022 at 09:09

‘Be a waste transformer’ was Lindner's call, but also its promise to the waste and recycling industry at Ifat 2022 where Lindner highlighted the importance of the circular economy.

Now available for site dumpers

Now available for site dumpers

Published 4/7, 2022 at 09:08

Mecalac has announced the international roll out of state of the art telematics connectivity across its site dumper portfolios. The latest models can now be equipped with MyMecalac Connected Services either as an option from the factory or as a retrofit kit.

Strabag relies on ‘Likufix’ from Liebherr

Strabag relies on ‘Likufix’ from Liebherr

Published 4/7, 2022 at 09:07

One of Europe's largest construction service providers, Strabag SE from Austria, has been successfully using the fully hydraulic quick coupling system Likufix from Liebherr for several years now in addition to several Liebherr construction machines and attachments. Strabag uses the fully hydraulic Liebherr quick coupling system for all existing and new Liebherr machines, as well as for most machines from other manufacturers.

Meet the ‘Viking’

Published 4/7, 2022 at 09:06

To provide contractors with efficient floor preparation equipment for outdoor applications, surface preparation company National Flooring Equipment has released the Viking. This will be the most powerful ride on scraper in National Flooring Equipment’s product offering and is designed with precision, safety and performance in mind for use in large scale outdoor applications such as roadways, bridge decks and airport runways.

Experience Sennebogen's big recycling future at Ifat 2022

Experience Sennebogen's big recycling future at Ifat 2022

Published 4/7, 2022 at 09:06

As big and with as many innovations as never before, Sennebogen says it is once again setting significant standards for the future of the recycling industry at Ifat and presented, among other things, new battery powered material handlers.

Simplicity prevails as Epiroc introduces the new ‘V’ cutter

Simplicity prevails as Epiroc introduces the new ‘V’ cutter

Published 4/7, 2022 at 09:05

With its V shaped design, the latest drum cutter from Epiroc has been designed to set a new standard in trenching and quarrying. The company says it is a seemingly simple solution with extraordinary effectiveness that enables energy savings of up to 40%. In a world where advanced technology evolves at an unprecedented pace, it feels reassuring that some revolutionary product development is self-explanatory.

New tools and attachments for the ‘Methor’ multi tool

New tools and attachments for the ‘Methor’ multi tool

Published 4/7, 2022 at 08:42

Designed as a multi tool, the Doppstadt Methor ensures high flexibility for a range of tasks and materials. Thanks to its modularity, the single shaft shredder can easily be adapted to various requirements. At the Ifat in Munich from 30 May to 3 June, Doppstadt showcased new tools and attachments for the multi tool.

RM hybrid saves up to 25% on fuel costs

Published 4/7, 2022 at 08:41

Sharply rising fuel prices, legal requirements for emissions, business expansion and environmental protection are some of the many reasons for switching to hybrid machines. As a pioneer in electrification, the RM Group has now been producing crushers with electric drives for 30 years. This expertise is integrated into RM hybrid crushers and screens. Two of these crushers and an RM MSC8500e mobile hybrid screen were on display at Hillhead in June.

BHS rotor impact mill with new hammer design optimises output quality

BHS rotor impact mill with new hammer design optimises output quality

Published 4/7, 2022 at 08:40

BHS-Sonthofen has launched its proven rotor impact mill but which now features a new hammer design and maintenance concept. The high performance crusher with a vertical shaft is used to recycle metalliferous composites and industrial waste for fine processing. Customers benefit from significantly improved output quality, easier maintenance and a higher degree of machine availability.

Doppstadt to showcase electric motors for its machines at Ifat

Doppstadt to showcase electric motors for its machines at Ifat

Published 4/7, 2022 at 08:40

At Ifat, the Doppstadt Group showcased the ‘Inventhor’ 6 with electric drive. Furthermore, this resource saving alternative to the conventional diesel engine will also be standard equipment for the company’s ‘Methor’ and its screens. The electrically driven variants stand out due to their extraordinary economic efficiency, as well as being extremely durable to help to keep operating and inspection costs down.

New DX27Z-7 and DX35Z-7 from Doosan

New DX27Z-7 and DX35Z-7 from Doosan

Published 4/7, 2022 at 08:38

Doosan Infracore Europe has announced the launch of the new DX27Z-7 2.8t and DX35Z-7 3.9t Stage V compliant mini excavators. Both new models provide a larger working range than the previous generation machines, together with higher lifting capacities and digging forces.

New Evo2 generation from Kleemann

Published 4/7, 2022 at 08:37

The overload systems of the MC 110 Evo2 and MCO 90 Evo2 pursue the goal of increasing in the operational readiness of the plant in a sustainable manner by guaranteeing a crushing process that is as continuous as possible, according to Kleemann.

Ecomondo turns 25 this year

Published 4/7, 2022 at 08:37

Ecomondo, an event for technological and industrial innovation in the green and circular economy sector, is renewing its commitment to the environmental challenges to be pursued with the people, associations and consortia that have worked with it since the beginning 25 years ago, to achieve these shared objectives.

Aquajet offers innovative solutions for hydropower applications

Aquajet offers innovative solutions for hydropower applications

Published 4/7, 2022 at 08:36

Aquajet, a global leader in hydrodemolition machine manufacturing, offers a line-up of cutting edge hydrodemolition equipment for concrete repair and restoration in hydropower applications.

The next generation Sennebogen 3.40 G 4t telehandler

The next generation Sennebogen 3.40 G 4t telehandler

Published 4/7, 2022 at 08:24

With the latest addition to its ‘Multi Line’, the 3.40 G-series, Sennebogen is now offering a new telescopic handler with a load capacity of 4t, a stacking height of 7.70m and a state of the art cab which may be elevated to an eye level of 4.10m for 360o all round visibility. The new generation G-series also provides high levels of user friendliness and efficiency.

KRC range of innovative drum cutters from Kemroc

KRC range of innovative drum cutters from Kemroc

Published 4/7, 2022 at 08:23

Kemroc design engineers have come up with a clever way to improve the performance of rotary drum cutters for trenching.

Five new compact wheel loaders

Five new compact wheel loaders

Published 4/7, 2022 at 08:22

Following the signing of an exclusive supply agreement with Netherlands based Tobroco-Giant, Doosan has confirmed the details of the new five model range of 3.5t to 5t compact wheel loaders now available from the company.

Join our Newsletter

PDi TV

Info

×